Hints and Things does not use any 1st Party cookies - more information .
Dimming Your Way To A Comfortable Evening
Maybe the long cool winter night has you charged to have a couple of your rooms on dimmer switches.
You may want to snuggle in bed in a dimmed room while watching your favorite show. Or perhaps now’s the time for that candlelit dinner you’ve been thinking about having.
Almost any light switch can be changed into a dimmer switch for very little cost, plus, it’s easy to do yourself.
To change a light switch into a dimmer switch, buy a high quality dimmer switch and plate at the hardware store.
Make sure the plate contains a couple of screws to screw it on or you may need to use the old screws. The same holds true for the dimmer housing.
Use flathead screwdriver to remove the old plate and
pull out the old switch which could be wired in with two wires or with
three (including a ground). The ground screw is usually green and is along
the side of the dimmer unit.
Use a screwdriver to attach the dimmer switch housing to the frame around the electrical unit.
The holes for the screws are standardized and should fit only one way.
Imagine how nice your dimmed room will look and how much electricity you’ll save when you’re in control of your lighting.
NOTE: From 1 September 2012, an EU directive aimed at reducing the energy use of lighting, meant that retailers are no longer be allowed to sell 40W and 25W incandescent bulbs. Similar bans came into effect for 60W and 100W incandescent bulbs over the past three years. Only low energy bulbs can now be sold.
Many of the low energy bulbs on the market are not suitable for use with dimmer switches, it is, therefore, imperative to check the packaging and/or supplier to ensure the correct bulb is purchased.
Originally contributed by localcontractorbids.com but it would appear this site is no longer online.
Copyright © 2000-2017 Hints and Things
Hints and Things cannot be held responsible for any information given on this site nor do they necessarily agree with, or endorse, the views given by third parties.