machine and unplug from socket.
off the capsule cage & frothing attachment
tool & capsule holder provided.
these items into a pint of water; include the capsule holder but not the
plastic tool, & add one cleaning tablet. Soak for 1 hour.
careful not to lose the following. Put these all in the solution.
put 1 pint of water into water tank and add 30 mls of Nilscale.
in machine, turn on power at plug only, for
M300, Robot café & l`expresso,
are automatically descaling machines. You will need to read your
all other models turn on at
machine as if making coffee without capsule holder or cage in. into a
cup or suitable container run ˝ a cup through.
steam side of machine on water not steam without frothing attachment
into a cup. Until cup is ˝ full. Stop this function.
off machine and leave for 15 minutes.
this cycle (1/2 cup-1/2 cup leaving to stand for 15 minutes) until all
solution has gone from water tank.
water tank with soapy water, rinse, and fill with clean fresh water.
frothing nozzle etc. from cleaning fluid, wash in soapy water and rinse.
you are ready to put the capsule cage back into the machine.
Put this on top of the spring this way up.
Then put spring on top of capsule cage,
if this is blocked
you will need to clear with
, put o-ring
on top of capsule cage at thread.
capsule cage using tool and capsule holder.
take frothing nozzle, if end blocked clean with needle, not this
tool, as it will make the hole to big.
onto end of steam tube.
machine again and run 2 cups of water through steam nozzle.
run 2 cups of water through the capsule cage.
,you will need to do this once a month
to keep machine working as new.
Magimix Coffee Machines